Our Strategy


Treating an existing structure for termites requires numerous steps.

  • Inspection

  • Identifying activity & potential problem areas

  • Formulating a treatment plan

  • Communicating treatment options with the customer

  • Performing the treatment

  • Quality control follow-up



Drilling Treatment to wall and floor junction. Holes of 12mm diameter 18-24 inches apart will be drilled along the inner junction of wall and floor at depth of 6” on the entire ground and 4” on the first floor premises.

People have came up with many ways of pest-control. Some of them are very effective and popular, while some a for users on budget.Some may be made yourself, or otherwise called do-it-yourself methods, while some can only be used by professionals.There’s a vast choice when It comes to controlling the parasites around your home. Some are used in combination with others.



4 to 6 liters of FIPROMITE solution will be injected under pressure into these holes to create barrier against termites. If heavy infestation is noticed on 2nd and above floors the same treatment will be carried out on that particular floor.

The technology of non repellents such as Fipromite 50 SC is an advancement over other termite insecticides.For many years, the traditional method of controlling subterranean termites was to apply a liquid pesticide, known as a termiticide, to the soil. This chemical treatment relied on the application of a chemical barrier around and beneath the structure designed to block all possible routes of termite entry. Any termites attempting to penetrate through the treated soil were either killed or repelled.

Treatment to Wooden Fixtures


Holes of 0.8mm diameter will be drilled at the base of wooden-fixtures such as window frames and door frames adjoining the flooring and FIPROMITE solution will be injected. This treatment will be carried out on all floors (except basements/Terrace). Termiticide will be sprayed on all the wood work infested by the termites within the premises. Special care will be taken in case furniture attached to the wall as the termites can easily attack them. Drilling will be carried out at the base of  all such fixture and FIPROMITE solution will be injected.However, it must be emphasized that spot treating the wood is not a complete termite treatment in that it will not stop the termites from attacking the wood in other areas.

Lawn Treatment


Termites are not only a cause to damage the beauty of your lawn, grass and trees, it also transfer the infestation from Lawn to your house. Lawn treatment is the process to prevent you and your valuables from such damages.

There are two types of termites that are most common in lawns: Subterranean (Rhinotermitidae) or agricultural (Termitidae). Both termite types have “workers” that cause the damage, and “soldiers” that defended the colony. The reproductive castes are known as “queen” and “kings” and swarm during the spring and summer months.A third type of termite is known as Drywood and essentially lives in the plants themselves, like in trees where they eat wood. Subterranean and agricultural termites live in the soil, where they tunnel through and attack cellulose either on the roots of plants, or above ground.